제품소개

HOME > 제품소개 > TERUMO BCT

Trima Accel® Collection System

Get the Flexibility You Need in a Dynamic Environment

Collection needs fluctuate—so you need flexibility. The Trima Accel system streamlines the collection of any transfusable component in any combination. It is the only apheresis system on the market today with the versatility blood centers need for full-spectrum component combinations—helping you to meet your collection goals with a single device. This flexibility and agility have helped make the Trima Accel system one of the world’s leading apheresis devices.

Pair the device with powerful software options designed to match component needs and optimize collections, helping you do more with less.

Simple, Efficient Collections and Higher-Quality Components
  • Simplifies Collections
  • Use a single device to collect any transfusable component, in any combination, from a wide range of donors
  • Reduce the need for training and the number of standard operating procedures
  • Target the blood types you need most
  • Maximize donations from every donor
  • Respond quickly and easily to fluctuations in demand for specific products

Collects Higher-Quality Blood Components

  • Reduce the likelihood of bacterial contamination of platelet products: Collecting platelets with a single-stage separation device has been credited with reducing the likelihood of bacterial contamination, a primary risk for recipients of platelet transfusions in the U.S According to the Centers for Disease Control and Prevention (CDC), 1 in 1,000 to 3,000 platelet units is contaminated with bacteria, and bacterial contamination is the second most common cause of transfusion-related deaths in the U.S.
  • Improve corrected count increments A recent retrospective analysis of transfusion outcomes credits single-stage separation with higher corrected count increments, as compared to platelets collected using dual-stage separation.

Saves Time

  • Easy setup
  • Guided use helps operators spend more time with donors and less time with equipment

  • In-process leukoreduction for ready-to-transfuse products has these labor-saving benefits:

    • Maximum blood center efficiency
    • Potential for increased staff utilization
  • Faster platelet procedure run times as compared to competitors may improve scheduling and donor satisfaction
  • Comprehensive product support: we are here to help if you need it
  • Robust software solutions to help meet your challenges and goals: increase efficiency, improve traceability, simplify troubleshooting, reduce downtime

Keeps Donors Safe

  • The intelligent Safety Box helps ensure donor safety and promote operator confidence
  • Donors spend less time in the chair, with 25 to 40 percent shorter procedure times than comparable apheresis devices
  • Donor discomfort is reduced and the donation experience is improved with single-needle procedures
The Trima Accel System
Helps Enhance Blood Safety in Rwanda

How It Works

The Trima Accel system is an apheresis collection device that uses a centrifuge to separate whole blood into its components—platelets, plasma and red blood cells (RBCs). Blood components are quickly and efficiently separated by density and size, then the targeted components are collected and the remaining components are safely returned to the donor.

The Trima Accel system collects the targeted component(s) based on two important criteria:

1. The components you need to collect to meet demand, based on your configured priorities

2. What each donor is able to safely donate, based on his or her physiology and cell count
The system includes the Trima Accel device, a variety of tubing sets and system software.

Meet Your Needs With Flexible Configurations

To help you meet your blood center’s collection goals, you can configure desired product volumes, yields and combinations. In addition, you can ensure that final products meet specifications by calibrating the device to your blood center’s cell counter.

Enjoy Simple and Safe Operation
  • Step-by-step procedure prompts and a sophisticated touch screen graphical user interface guide operators confidently through a variety of collections
  • Safety is built into each collection with the patented Safety Box, combining flexibility with the safety you need. Set maximum volume, minimum platelet post-count and post-hematocrit, and maximum procedure time to meet your center’s needs—always within safe limits
  • Donor qualification could not be easier—the system is programmed to offer a range of component donations that each donor can safely provide
  • Software helps manage your process, reducing paperwork and simplifying record-keeping
  • Software creates visibility into your operations, providing the actionable data you need to make informed decisions

*The Trima Accel system is available in select markets.

 

Comprehensive Component Collection

Platelet Collections
  • Collect the products you need with the flexibility to define multiple platelet products
    • Customize yield, volume and/or concentration for each platelet product
    • Collect single, double or triple products based on donor qualification
    • Collect platelets in plasma or in PAS
  • Produce highly consistent yields via sophisticated prediction algorithms
  • Save time, simplify processing, reduce product handling and stop losing platelets to post-collection filters with the integrated Leukocyte Reduction System (LRS®) chamber
  • Let the system do the work: built-in monitoring alerts you when a product can be labeled as leukoreduced
Red Blood Cell (RBC) Collections
  • Meet patient needs through automation with the flexibility to define three RBC products
  • Produce highly consistent volumes, configurable between 150 mL and 250 mL
  • Safely maximize the value of each donation—flexible donation options help make the most of each qualified donor
  • Collect what you need most:
    • RBC products concurrently with platelets and/or plasma
    • Double RBC products
Plasma Collections
  • Leverage the flexibility to define multiple platelet products
    • Utilize multiple unique options to define the desired plasma products
    • Specify up to six fixed collection volumes for standardized plasma units, or maximize the plasma yield for a specific procedure within donor-dependent limits
  • Let the system do the work: built-in monitoring alerts you when a product can be labeled as leukoreduced

*The Trima Accel system is available in select markets.

 
Spectra Optia® Apheresis System

The Spectra Optia system is an industry-leading therapeutic apheresis, cell processing and cell collection platform that allows operators to spend more time focusing on patient care. This advanced system uses continuous-flow centrifugation and optical detection technology, providing operators the ability to perform a wide variety of apheresis procedures on a single platform.

Easy to Use
  • Minimize training and reduce inventory and storage with tubing sets designed for multiple procedure types
  • Control procedures with real-time interface monitoring, interpretation and adjustment with the automated interface management (AIM) system
  • Easily move and store the Spectra Optia system with its compact and stable design, including a collapsible monitor and IV pole
Focus on Patients, Not Technology
  • Focus on patient comfort and safety with optimized fluid balance, customized anticoagulant infusion management and tubing sets with low extracorporeal volume
  • Access procedure data quickly and easily on the intuitive touch screen while reducing the need for manual calculations

System Features

Automated Interface Management (AIM) System

As the AIM system continuously monitors the interface, you get meaningful interpretations.

  • Automates interface adjustments without sacrificing your control
  • Helps you efficiently remove targeted components
  • Helps you achieve highly predictable results through interface stability
Interactive Touch Screen

This intuitive touch screen connects you to the relevant information.

  • Guides you through each step of the protocol
  • Helps you enter the necessary patient and procedure data
  • Gives you the right information at the right time to enhance protocol efficiencies
  • Provides clear alarms that you can see at a glance
Mobility
  • Large, durable wheels on pivoting casters bring maneuverability to your system
  • Space-conscious design
  • Telescoping IV pole extends for the procedure and then lowers for transportation and storage
  • Touch screen folds down to help simplify transportation and storage
  • Weight: 92 kg (202 lb)
  • Dimensions:
    • Height: 106.4 cm (41.9 in) (without the IV pole)
    • Height: 162.1 cm (63.8 in) (with the IV pole)
    • Width: 52.7 cm (20.75 in)
    • Depth: 81.3 cm (32.0 in)
Fluid Management
  • Performs the calculations you need to attain the desired fluid balance
  • Allows you to adjust the parameters for procedures
  • Provides custom prime recommendations based on the patient information you enter
  • Performs calculations and adjustments after custom prime
  • Allows you to customize the AC infusion rate for each procedure
  • Monitors fluids with detectors on the AC and replacement lines
Tubing Set

Ready-to-use tubing sets are designed to handle multiple procedure types.

    • Load the snap-in-place cassette in a few steps
    • Receive system verification when you have the correct tubing set in place for the selected protocol
    • Accommodate your smaller patients with the low-volume tubing set

Increase the Productivity of Your Laboratory With Reliable, Sturdy Welds

Designed for quality, reliability and flexibility, the TSCD-II welder is a next-generation, closed-system device that can be used to connect polyvinyl chloride (PVC) tubing in any combination of wet and dry.

The TSCD-II welder may be used across your blood center to connect PVC tubing during tasks, including:

  • Component pooling
  • Leukoreduction
  • Pathogen reduction
  • Collection set modification
  • Component aliquoting
  • Quality control sampling
  • Cell washing and freezing
 
How Could You Benefit From Using the TSCD-II Welder With TOMEs?

Learn how the power of software can increase your power to perform.

Learn More

Easy to Use

The wafers used by the TSCD-II welder heat up to 300 ̊C, maintaining sterility during cutting and welding without allowing particulates or chemical residue to form in the tubes. The design enables fast, one-handed operation, and durable materials stand up to intensive use.

  • Maintains a closed system
  • Joins any combination of tubing: wet-to-wet, dry-to-dry, wet-to-dry
  • Provides automatic wafer replacement
  • Features an interconnected clamp for one-handed operation
  • Guides use and displays process on the screen
  • Supports bags with detachable shelves
  • Reduces the risk of jams with a wafer monitor and a large used-wafer disposal box
  • Creates welds that meet or exceed the tensile strength requirements of ISO 3826-1

The TSCD-II welder is available in select markets.

Increase Efficiency With Fast, Dependable Seals

In 3 seconds or less, T-SEAL III creates consistently reliable tubing seals that are easy to separate. Contact your Terumo Blood and Cell Technologies representative today to get started.

Setting a New Standard for High-Quality Sealing

  • Sealing takes just 0.5 to 3 seconds, depending on tubing size.
  • Works with EVA and PVC tubing.
  • Slim design (70 mm/2.75 in wide) — use it on its own, or cascade it with other T-SEAL III and existing T-SEAL II devices.*
  • Join up to eight devices for simultaneous preparation of tubing segments.
  • Colored sealing indicator shows status at a glance: ready, active sealing. LED Indicator shows alarm and disables sealing functionality.
  • Optical tube detection triggers sealing with no delay.
  • Sealing head and front electrode cover are removable for cleaning.

PVC: polyvinyl chloride; EVA: ethylene vinyl acetate.
*T-SEAL II is for use with PVC tubing only.

Contact your Terumo Blood and Cell Technologies representative to learn why the T-SEAL III device sets the standard for sealers.

 

Save Time With This Versatile Handheld Tubing Sealer

Create dependable tubing seals quickly and easily, wherever you need them, at the donor chair and beyond.

  • Compact design slips easily into your lab coat pocket
  • Intelligent sensor automatically adjusts the sealing process based on the tubing material and diameter
  • Device displays sealing status, so you know when your seal is complete
  • Delivers approximately 1,500 seals per charge
  • Device fully charges in about three hours
  • Designed for use with polyvinyl chloride (PVC) and ethyl vinyl acetate (EVA) tubing
  • Accommodates PVC tubing up to 6.2 mm (0.24 in) outer diameter and EVA tubing up to 5.4 mm (0.21 in) outer diameter

How It Works

Create dependable tubing seals on the go in just a few steps

  • Place the tubing in the slot of the T-SEAL Mobile.
  • Check that the tubing is positioned between the electrodes in the slot.
  • Squeeze the trigger to bring the two electrodes closer together until the orange seal indicator light is no longer illuminated.
  • When the seal indicator light goes out, the sealing process is complete.
  • Remove the tubing and separate the two sides of the seal by pulling on both sides of the tube.

T-SEAL Mobile is available in select markets.